Gpi Trigger; Adding An Spl To The Gpi-Spl List; Deleting An Spl From The Gpi-Spl List - Sony Screen Management System User Manual

GPI Trigger

The GPITRIGGERS
Tap GPI Trigger
pane shows all Playlists
(SPL) for which
playback will be
controlled by using an
external GPI signal as a
trigger.
In the GPITRIGGERS
pane, you can register
and cancel GPI
triggered SPL playback.
To bring up the
GPITRIGGERS pane,
tap Manu, Shows, GPI
Trigger in sequence.

Adding an SPL to the GPI-SPL List

SPLs that will be played using GPI triggering are shown in
the GPI-SPL list. To register an SPL in the GPI-SPL list,
first select the GPIO input channel, and then select the SPL
to play by GPI triggering from the SPL Title list. The
period during which GPI triggering is active can be set
with the Association Term item. Tap the Edit button and
specify the Start and End points. After using the Add
button to register the entry in the GPI-SPL LIST, tap the
Save button to save the setting.
GPIO input SPL Title
channel
Association
Edit Edit
Team
The GPIO Profile setting for the respective GPIO input
channel can be made at the SMS Controller. This should be
completed before setting the GPI Trigger. For information
on the steps for making GPIO Channel and GPIO Profile
settings, refer to the SMS Controller User's Guide.
Shows Menu
Add GPI-SPL LIST
Save

Deleting an SPL from the GPI-SPL list

To delete an SPL registered in the GPI-SPL list, select the
SPL and tap the Remove button.
Then tap the Save button to save the setting.
Remove
GPI-SPL List
Save
Shows
29