Adjusting The Throttle Cable; Harness - Stihl SR 200 Instruction Manual

English
a
1
Slide the control handle (1) along
N
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
must be at least 500 mm (20 in) (a).
1
Secure the hose clamp (1) with the
N
screw (3).
10

Adjusting the Throttle Cable

It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
2
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set throttle trigger to the full throttle
3
N
position – as far as stop.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.

Harness

Adjusting the Harness
Pull the ends of the straps
N
downwards to tighten the harness.
Adjust the harness so that the
N
backplate fits snugly and securely
against your back.
Loosening the Harness
Lift the tabs of the sliding adjusters.
N
SR 200