Operating Mode Description - MPP Solar 2424LV-HS User Manual

Operating Mode Description

Operation mode
Standby mode / Power
saving mode
Note:
*Standby mode: The inverter is
not turned on yet but at this
time, the inverter can charge
battery without AC output.
*Power saving mode: If
enabled, the output of inverter
will be off when connected load
is pretty low or not detected.
Fault mode
Note:
*Fault mode: Errors are caused
by internal circuit errors or
external reasons such as over
temperature, output short
circuited and so on.
Line Mode
Battery Mode
Description
No output is supplied by the
unit but it still can charge the
batteries.
PV energy can charge the
batteries.
The unit will provide output
power from the mains. It will
also charge the battery in line
mode.
The unit will provide output
power from battery and PV
power.
LCD display
Charging by utility.
Charging by PV energy.
No charging.
Charging by PV energy.
No charging.
Charging by PV energy
Charging by utility.
Power from battery and PV energy.
Power from battery only.
21