Managing Seam Programs - Pfaff 1571 Instruction Manual

Input
11

Managing seam programs

.03
The program management displays the contents of the machine memory in the left-hand
half of the screen and the SD card in the right-hand half of the screen, and is used to erase
and copy programs. The selected programs are displayed in red. The machine data can be
saved on the SD card or loaded from the SD card if the MDAT function is activated. The for-
mat function is used to format the SD card. The individual operations are displayed in eng-
lish in a dialogue box After inserting the SD card, it will take up to 20 s until the SD card is
recognised as inserted.
 Switch the machine on.
 Call up input mode.
 Call up program management.
Description of the functions
Rewrite directory
To mark
Reverse the marking
Directory up
Directory down
New directory. No subdirectories can be created in the machine memory.
76
SD card and machine memory are re-read.