Altering Seam Programs; Error Messages - Pfaff 3734 -12 Instruction Manual

Sewing
10

Altering seam programs

.03
10

Error messages

.04
If an error occurs, the text „ERROR" appears on the display, together with an error code and
short instructions. An error message is caused by incorrect settings, defective elements or
seam programs and by overload conditions.
For an explanation of the error codes see Chapter 12.07 Explanation of the error
messages.
10 - 3
Switch on the machine.
Select the programmed sewing mode with the PM key.
PM
1
With the corresponding +/- key select the seam program to be altered.
With the corresponding +/- key select the seam section of the seam program which is to
be altered.
By pressing the corresponding +/- key select desired value for the stitch length of the feed
band.
By pressing the corresponding +/- key select desired value for the stitch length of the feed
wheel.
PRESS TE-SPEED
Eliminate the error.
Confirm error elimination by pressing the TE/Speed key.
2
1 2.6 2.5
ERROR
E001