Table of Contents
Advertisement
5 Operating via Hik-Connect App
Purpose:
Hik-Connect is an application for mobile devices. With the App, you
can view live image of the camera, receive alarm notification and so
on.
Note:
Hik-Connect service is not supported by certain camera models.
Enable Hik-Connect Service on Camera
5.1
Purpose:
Hik-Connect service should be enabled on your camera before using
the service.
You can enable the service through SADP software or web browser.
5.1.1
Enable Hik-Connect Service via SADP Software
Steps:
1. Check the checkbox of Enable Hik-Connect on:
"Activate the Device" page during camera activation, refer to
1).
Chapter 3.2.2.
Or "Modify Network Parameters" page during modifying IP
2).
address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.
Network Box Camera·Quick Start Guide
31
Advertisement
Table of Contents
