nvent 910 Series Installation, Operating And Maintenance Instructions page 8

RAYCHEM 910 controller in an 8" x 10" stainless-steel
enclosure with window. 2-pole 30 A EMR. Controls a single
circuit with a 2-pole electromechanical relay.
(Approved for ordinary areas only)
RAYCHEM 910 controller in an 8" x 10" stainless-steel
enclosure with window. 2-pole 30 A EMR. Controls a single
circuit with a 2-pole electromechanical relay. Includes an
isolated 2-wire RS-485 communication option.
(Approved for ordinary areas only)
RAYCHEM 910 controller in an 8" x 10" stainless-steel
enclosure with window. 2-pole 30 A 277 V SSR. Controls a
single circuit with a 2-pole solid-state relay.
(Approved for Class I, Div. 2 areas)
RAYCHEM 910 controller in an 8" x 10" stainless-steel
enclosure with window. 2-pole 30 A 277 V SSR. Controls a
single circuit with a 2-pole electromechanical relay. Includes
an isolated 2-wire RS-485 communication option.
(Approved for Class I, Div. 2 areas)
RTD SENSORS
100-ohm platinum RTD with 10' stainless-steel corrugated
sheath
RTD, ambient, cable style
C1D1 RTD, –100°F to 900°F, pipe mounted
RTD, –100°F to 900°F, pipe mounted
8 | nVent.com
OPTIONS
Append the following code(s) to the end of the standard Model Code to have the option
included at the factory
Option Code
*232
*MDM
*ALR
*ALG
Contact your local representative for configurations not listed here.
910*E1SW*EMR2
910*E1SW*EMR2*485
910*E1SW*SSR2
910*E1SW*SSR2*485
RTD10CS
MONI-RTD-200
RTD7AL
RTD4AL
Description
RS-232 communications option (replace *485 with *232)
Modem communications option (replace *485 with *MDM)
Red LED pilot light
Green LED pilot light
10170-003
10170-017
10170-004
10170-018
RTD10CS
254741
RTD7AL
RTD4AL
20
20
25
25
1.0
0.1
2.0
1.2