IMPORTANT:
• Setting the programmed passcode to "0" disables passcode protection.
• The console does not have to be unlocked to reset alarms.
3.4.7 FEATURE MODES
There are two types Configuration Menus in the 910 Series Controller.
1. A "Basic" Configuration Menu which only contains seven parameters
2. An "Advanced" Configuration Menu which contains all of the parameters
Both types of Configuration Menus contain a "Feature Mode" parameter which allows the user
to select which type of Configuration Menu is most desirable.
3.4.8 QUICK NOTES ON OPERATION
Remember the following basic rules for efficient Console use:
• Use the SHIFT key followed by the appropriate function key—ALARM, MONITOR, or
CONFIG—to select the operating mode
• Use ▿ and ▵ to move around in the menu
• Use ▹ to enter a new menu, enter a new value, or select a menu item
• Use ◃ to exit the current menu or cancel an edit
nVent.com | 17