Steps
1. Using the alignment posts, place the fan on the palm-rest and keyboard assembly.
2. Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
3. Connect the fan cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
3. Exit
Service
Mode.
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
base
cover.
About this task
The following image indicates the location of the I/O-board and provides a visual representation of the removal procedure.
46
Removing and installing components
After working inside your
Before working inside your
computer.
computer.