KING One Pro KOP4800 Owner's Manual page 15

11 . Use the arrow buttons on your re-
mote to highlight "Watch TV" and
press Select .
The receiver will acquire signal .
12 . Watch TV!
NOTE: Your Wally should have downloaded its program guide already . Check and make sure the full guide is
available . If it is not, you will need to reset the Wally for it to download the full guide .
If there is a software update available for your Wally, it will automatically download when you put your
Wally in standby mode .
You can now use STANDARD OPERATION on page 14.
Install • Summary
Call 1-800-333-DISH (3474) for assistance.
Internet Connectivity
!
Use your internet connection to access free and paid
Internet: Not Connected
on-demand titles, get proactive customer support, and more.
TV Settings
Resolution: 480p
Remote Control Settings
!
Paired TV: Not Set
Receiver Activation
Status: Activated
Press the SYS INFO button on the front of your receiver for more information.
Acquiring Signal
This should take no more than 5 minutes to
complete...
Software Version U418 Receiver ID XXXXXXXXXX-XX
Smart Card ID XXXXXXXXXX-XX
Get Connected
Set Resolution
Set up your remote to control your TV.
Pair to your TV
Activate Receiver
Watch TV
535
Page 13
KC958
KC959