Standard Operation - KING One Pro KOP4800 Owner's Manual

Dish & wally receivers
Hide thumbs Also See for One Pro KOP4800:
Table of Contents

Advertisement

IF YOUR RECEIVER IS NEW AND UNACTIVATED, MAKE SURE TO
DO THE FIRST-TIME SETUP PROCEDURE ON PAGES 8-13 FIRST.
WHILE IN USE, DO NOT BLOCK THE ANTENNA
UNIT'S LINE OF SIGHT TO THE SATELLITES IN
THE SOUTHERN SKY AT ANY TIME!
Place on a reasonably level surface
Pointing the handle approximately north
may speed up scan time, but is not
required for a successsful search
ANTENNA
UNIT
NOTE: This manual shows graphics for a DISH Wally receiver . If you have a ViP model receiver, you can access the
KING One with ViP Receiver Owner's Manual by going to kingconnect.com/support . Click on "Owners Manu-
als" and choose the manual for KING One with ViP receiver .
1 . After connecting and turning on
your equipment, the Wally Startup
screens will appear (this may take
several minutes) .
NOTE: If the Wally Standby screen
appears, press any button on your
remote to continue .
IMPORTANT!
Your TV screen may look different from what
is shown in this manual. Screen information
may vary depending on choices you make.
For best results,
follow the on-screen instructions.
Page 14

STANDARD OPERATION

OBSTRUCTIONS
KC1148
SATELLITES IN
SOUTHERN SKY
IMPORTANT!
If you move the antenna unit any
time during or after the scan, you
will have to repeat the scan.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents