Call Waiting (Camp-On); Busy Override - Joining A Call In Progress - Siemens HiPath 5000 RSM Operating Instructions Manual

Step by Step
( )

Call Waiting (Camp-On)

It is important that you reach the called party, but the
number is busy.
Lift the handset.
Enter the internal station number.
Wait (approx. 5 seconds) until the busy tone is followed
by the ring tone.
The called party can then respond Æ page 9.
The called party can prevent automatic call wait-
ing Æ page 10.
If this feature is configured (contact the service
personnel), you will hear the ring tone
immediately.
Busy Override - Joining a Call in
Progress
This function is only available if it has been configured
by the service technician (contact the service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Enter the code.
The called party and person to whom this party is
talking hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
If You Cannot Reach a Destination ...
25 25 25 25