Locking Another Telephone To Prevent Unauthorized Use; Using System Functions From The Outside (Disa: Direct Inward System Access) - Siemens HiPath 5000 RSM Operating Instructions Manual

Using Other Functions
Step by Step
36 36 36 36
Locking Another Telephone to Prevent
Unauthorized Use
If this function has been configured (contact the service
personnel), you can lock other telephones to prevent
unauthorized use, and later unlock them again.
You can use this function to unlock the telephone for
users who have locked their telephones and then
forgotten their PINs.
Lift the handset.
Enter the code.
Enter the internal number of the telephone that you
want to lock or unlock.
Enter the code for "Changeover on".
or
Enter the code for "Changeover off".
Using System Functions from the
Outside
(DISA: Direct Inward System Access)
If this function has been configured (contact the service
personnel), you can set up external outgoing calls from
outside the system, just like an internal user. You can
also activate and deactivate the following functions in
your system:
• Reset services and functions,
code: #0 Æ page 33
• Call forwarding, code:
• Lock and unlock phone,
66/#66 Æ page 26
code:
*
• Save PIN,
93 Æ page 27
code:
*
• Send a message,
68/#68 Æ page 32
code:
*
• Group ringing, code:
• Group call, code:
• Suppress caller ID,
86/#86 Æ page 14
code:
*
• Open door, code:
• Door opener on/off, code:
• Control relay, code
1/#1 Æ page 29
*
81/#81 Æ page 44
*
85/#85 Æ page 43
*
61 Æ page 12
*
89/#89 Æ page 13
*
90/#90 Æ page 39
*