Call Waiting - Siemens Gigaset 4010 User Manual

Press Keys:
NNNNNNNNNNNN
MENU

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
TAKE MSG
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
HOLD MSG
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
CALL BACK
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
ADD 2ND

Call Waiting

If you subscribe to Call Waiting on Caller ID, the in-
coming name and number is displayed while on a
call.
Answering a Waiting Call
While engaged in an active call, you hear the Call
Waiting tone. Announce to the first caller that you
will be put them or her on hold. Press the Flash key
 on the bottom left of the handset to answer the
second caller.
Reconnecting to the first Call

Press Flash key again, to reconnect the first call-
er. You may toggle between the two callers at any
time by pressing the Flash key.
Advanced Features
Some telephone companies off the features below
to handle waiting calls.
Select from among the following options during the
incoming waiting tone:
The options are selected as follows:
Open the Menu. Scroll to one of the following op-
tions and select by pressing OK.
Forwards the incoming call to your voice mail at the
central office.
or
Puts the incoming call on hold and plays a Hold an-
nouncement.
or
Asks the incoming caller to call back. Do not accept
the call.
or
Tells the telephone company to initiate a confer-
ence call which allows all three parties to talk.
Any recorded announcements associated
with the options are defined and recorded by
the telephone company and cannot be
changed by the Gigaset.
Call Waiting
23