Accessing Other Functions Via Codes; Accepting A Waiting Call; Call Waiting - Siemens HiCom 150 E Office Operating Instructions Manual

Accessing Other Functions Via Codes

Call Waiting

Accepting a Waiting Call

or (depending on the configuration)
Lift the handset.
Dial the internal station number.
If the party is busy, wait approximately five
seconds. The party is then called.
You hear a bleep tone during a call
Replace the handset (the current call is dis-
connected). Your telephone rings.
Lift the handset.
or
( )
Press the key.
Enter the code
5 5
the waiting party (the first call is on hold).
To return to the first call
( )
Press the key.
Enter the code
0
sume the first call (the second call is discon-
nected).
Press the key twice
( )
and resume the first call (the second call is
disconnected).
Accessing Other Functions Via Codes
*
55, and conduct a call with
* 0 or wait 2 seconds and re-
9