Command Summary; Command Descriptions; Unique Commands - Siemens DataNET Hub (DNH) User Manual

Command Descriptions

Description

Unique Commands

2000585-001
Chapter 4

Command Summary

This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be us-
ing for setup purposes or for performing test diagnostics.
These are the commands that are unique to the Advance DataNET Hub.
config address ip
xxx.xxx.xxx.xxx
config device id
config display
config netmask
xxx.xxx.xxx.xxx
config iproute
xxx.xxx.xxx.xxx
config timeserver
xxx.xxx.xxx.xxx
date
del
display
display links
dn
download
events on
events off
help
list
list nnn
Set the device IP address for this hub-half
Configure the DataNET hub device ID
Display the current non-volatile parameters
Set the IP subnetmask for this hub-half
Set the default router IP address for this hub-
half
Configure the IP address of a DataNET time
server
Set/display time and date
Delete selected SAT entries
Display SAT table
Display link state table
Displays or edits the parameters for setup
time or window
Download new hub firmware via the RS-232
Configuration port
Enable reporting of internal messages via the
internal buffer
Enable reporting of internal messages via the
internal buffer
Lists available CLI commands
List next 22 log events
List 22 events, starting with number nnn.
Command Summary • • • • 69