Siemens DataNET Hub (DNH) User Manual page 78

Command Descriptions,
70 • • • • Command Summary
Continued
list nnn, xxx
list on
list clear
login password
logout
netstat dn
password password
password
port start port
port stop port
reset
test port
test off
timeout on
timeout off
trace
trace on
trace off
trace port, port, ... port
trace filter
trace xxx.xxx.xxx.xxx
trace ports filter
validation timeout
verbose on
verbose off
List xxx events, starting with number nnn
Continuously list events from the log buffer,
as they are added (terminate listing with Con-
trol-C)
Clear all events from log buffer
Login to hub-half via the RS-232 Configura-
tion port
Log out of hub-half
Display statistics for DataNET ports
Change login password for hub-half
Start (or re-start) DataNET on a port
Stop DataNET on a port (takes a port out of
service, e.g. for testing)
Reset a hub-half
Put a port into hardware test mode
Turn off test mode
Enable user login timeout
Disable user login timeout
Display current trace settings.
Enable frame tracing (start adding selected
frames to event buffer)
Disable frame tracing
Select ports for frame tracing
Set filter mode for tracing
Set IP address filter for tracing
Set trace port list and filter mode in the same
command
Set the link validation timeout
Enable verbose event display
Enable single-line summary event display
2000585-001