Uc Laser Ir Control - ADJ ANI-MOTION User Manual

UC LASER IR CONTROL

The UC Laser IR infrared remote gives you control of various functions, as described below. To con-
trol the fixture, you must aim the remote at the front of the fixture. Maximum operating range is 30
feet.
The Airstream IR remote transmitter (sold separately) plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor. Maximum operating range is 15 feet.
After you have purchased the Airstream IR transmitter, the app is a free download from the app store
for your iOS phone or tablet. The app comes with 3 pages of control depending on the fixture you
are using. This particular unit works with App page 3.
STAND BY - Pressing this button will blackout the fixture.
PATTERN - Press this button for random show mode.
PATTERN "+" / PATTERN "-" - Use these buttons to select a show.
SPEED - Press this button to select show speed.
SPEED "+" - Press this button to increase the show speed.
SPEED "-" - Press this button to decrease the show speed.
COLOR BUTTONS - Press the color buttons R, G, or R+G to select your desired color(s). Please
note that buttons B, G+B, B+R, and R+G+B have no active function for this fixture.
STROBE - This button will activate the strobe effect. Press and hold to activate strobing, and release
to stop strobing.
SOUND - Press this button to activate sound active mode
AUTO FAST - Press this button to activate fast auto mode.
AUTO SLOW - Press this button to activate slow auto mode.
14