Infors HT Minifors 2 Operating Manual page 90

Minifors 2 - Benchtop Bioreactor
Before Cultivation
Page 88 of 214
4. Insert the sensor into the hollow screw with the thread pointing
in the downward direction.
5. Fit the fork of the guide bar into the groove of the hollow
screw.
6. Push the hollow screw and the guide bar together upwards
and insert the guide bar into the hole of the support guide.
7. Slide the O-ring onto the sensor and insert the sensor into the
port.
8. Adjust the sensor to the desired height.
07 February 2019