Coupling The Motor - Infors HT Minifors 2 Operating Manual

8.2.5

Coupling the Motor

07 February 2019
2. Insert the rapid coupling of the water inlet hose – note the
symbol on the basic unit - onto the lower connection nozzle
on the exit gas cooler.
3. Insert the rapid coupling of the water outlet hose – note the
symbol on the basic unit - onto the upper connection nozzle
on the exit gas cooler.
INFORMATION
The exit gas cooler only works when the temperature control
system is switched on (Temperature ON parameter)
For routine operation, it is not necessary to plug in and unplug the
motor cable. The motor connected during installation is only cou-
pled before cultivation. For details about connecting the motor ca-
ble, see the main chapter "Installation and Initial Operation" and
the chapter "Connecting the Motor Cable".
Minifors 2 - Benchtop Bioreactor
Before Cultivation
Page 103 of 214