Unpacking And Checking The Computing Unit - Siemens SIMATIC PC 670 Equipment Manual

Starting Up the Computing Unit
2.1

Unpacking and Checking the Computing Unit

Unpacking the computing unit
Unpack the item delivered to you as follows:
1. Remove the packaging.
2. Do not throw the original packaging away. Keep it in case you have to transport
your PC at some time in the future.
3. Please keep the enclosed documentation in a safe place. You will require it
when you first start up the item delivered to you and it is part of the device.
4. Check the packaging and the package contents for any visible damage.
Entering the production number (SVP number)
5. Record the serial number (SDVP number) of your computing unit in the table;
you will find it on the rating plate above the floppy disk drive on the side of the
device.
The SVP number and MLFB number provide unique identification of the device
or repairs or in the case of theft.
Entering the Microsoft Windows "Product Key" of the "Certificate of
Authenticity"
6. Enter the Microsoft Windows "Product Key" of the "Certificate of Authenticity"
(COA) in the table. The Product Key can be found on the unit on the power
supply cover. The Windows Product Key is necessary should the operating
system need to be reinstalled.
SVP No.
MLFB No.
Microsoft Windows Product Key
2-2
Panel PC 670 Computing Unit, Equipment Manual
Release 04/02