Reset Button - Siemens SIMATIC PC 670 Equipment Manual

Release 04/02
4.11

Reset button

A hardware reset is initiated by means of the Reset button on your device. The
computing unit is restarted.
On the computing unit, the Reset button is located on the drive side beside the
floppy disk drive. The Reset button can only be operated with the aid of a pointed
object (e.g. the tip of a ball-point pen or straightened paper clip). The position of
the Reset button is marked in the illustration of the computing unit below.
Figure 4-22
Panel PC 670 Computing Unit, Equipment Manual
Reset Button
Reset button
Maintaining and Extending the Computing Unit
4-27