Related Manuals for Siemens POL8T5.70/STD
Summary of Contents for Siemens POL8T5.70/STD
- Page 1 POL8T5.70/STD Climatix 7-inch capacitive hand held touch panel Basic Documentation A6V11521029_en--_c Smart Infrastructure 2020-10-15...
-
Page 2: Table Of Contents
Table of Contents About this document ..................5 Revision history ....................5 Reference documents ..................5 Accessories ..................... 5 Before you start ....................5 1.4.1 Symbols and abbreviations .............. 5 1.4.2 Trademarks ..................6 1.4.3 Copyright ..................6 1.4.4 Quality assurance ................6 1.4.5 Document use / request to the reader .......... - Page 3 Technical specifications ................25 Technical data ....................25 Interface description ..................26 DIP switches ....................29 Dimensions ....................29 A6V11521029_en--_c 3 | 30...
-
Page 5: About This Document
About this document Revision history 1 About this document 1.1 Revision history Version Date Changes Section Pages 2020-10-15 Highlighted the product size Cover page, 1, 8 of 7-inch. 2019-09-27 Added POL0C1.75/STD and 1.3, 2.4, 3.3, P5, P11, modified product package 4.3.3, 8.1, P12, P16, items. -
Page 6: Trademarks
This document may be duplicated and distributed only with the expressed permission of Siemens, and may be provided only to authorized persons or companies with the requisite technical knowledge. Siemens reserves the right to make any modification to this document without prior notice. 1.4.4 Quality assurance This document was prepared with great care. -
Page 7: Document Use / Request To The Reader
Siemens assumes no liability to the extent allowed under the law for any losses resulting from a failure to comply with the aforementioned points or for the improper compliance of the same. -
Page 8: Overview
Overview Product overview 2 Overview 2.1 Product overview The Climatix touch panel is based on Android, featuring a user-friendly interface, good user experience and more advanced functions. The GUI application supports multiple languages and offers transparent, cascading, fading and other special effects. -
Page 9: Topology
Overview Topology 2.2 Topology The following figures show examples of the communication between the Climatix touch panel, the PC, and the Climatix controller. Precondition The application in the Climatix controller must support Modbus communication via Ethernet, RS485 interface and/or local service interface (T-HI). With Climatix POL6XX controller Climatix POL6XX communication concept (here C600) -
Page 10: Product Design
Overview Product design 2.3 Product design The following is the mechanical design of the Climatix capacitive touch panel, POL8T5.70. Description Description Display / touch screen USB-B port RS485 communication USB-A port port and power supply Ethernet communication Label port and power supply 10 | 30 A6V11521029_en--_c... -
Page 11: Delivery Scope
Overview Delivery scope 2.4 Delivery scope Name Figure Quantity Touch panel A6V11521029_en--_c 11 | 30... -
Page 12: Safety Instructions
Safety instructions Residential applications 3 Safety instructions 3.1 Residential applications The Climatix touch panel is designed for applications in most residential environments. The technical design specification ensures that the product works stably at temperatures of -10 °C…+50 °C (+14 °F − +122 °F). Maximum Ambient Temperature is 50 °C (122 °F). -
Page 13: Mounting And Connecting
Check the package content for visible signs of transport damage and for completeness. Note: Do not install parts damaged during shipment. Contact your Siemens representative in the event of damaged parts. Note the information in the following sections of these operating instructions before... -
Page 14: Connect The Climatix Touch Panel
Mounting and connecting Connect the Climatix touch panel 4.3 Connect the Climatix touch panel Workflow for connecting the Climatix touch panel: 1. Connect the power supply. 2. Connect the configuration PC. 3. Connect the controller. 4.3.1 Connect power supply Please check local electrical standards and regulations. Contact the local supplier for more details. -
Page 15: Connect Configuration Pc
Mounting and connecting Connect the Climatix touch panel 4.3.2 Connect configuration PC A configuration PC can: ● Transfer a project ● Reset the Climatix touch panel to factory settings ● Back up, recover, or configure recipes USB Connection Use a USB cable to connect the configuration PC. The USB cable has a standard USB Type B male connector on one end. -
Page 16: Connect Climatix Controller
Mounting and connecting Connect the Climatix touch panel 4.3.3 Connect Climatix controller If it contains an executable project, connect the Climatix touch panel to the controller. RS485 Connection Use the RS485 port to connect to a Climatix controller. 1. Shut down the Climatix touch panel. 2. -
Page 17: Switch On The Climatix Touch Panel
Mounting and connecting Switch on the Climatix touch panel 0=Off 4.4 Switch on the Climatix touch panel Switch on the power supply. If the screen does not light up in two seconds after powering up, immediately switch off the power supply. You have probably crossed the cables on the power supply terminal. -
Page 18: Operating The Climatix Touch Panel
Operating the Climatix touch panel Operate the touch screen 5 Operating the Climatix touch panel Use the touch screen to operate and use the function keys to trigger associated configured functions within a project. Caution: ● Do not use pointed or sharp objects because they can damage the plastic surface of the touch screen. -
Page 19: System Keyboard
Upgrade the firmware of the Climatix touch panel using a USB stick. The Climatix touch panel is delivered with the latest firmware version, uploaded in the Siemens factory. Proceed with the following instructions only if required by Siemens representative. The following table lists the upgrade file name for the touch panel. -
Page 20: Upgrade Gui Application
Operating the Climatix touch panel Upgrade GUI application 1. When the upgrading process is finished, the Climatix touch panel restarts automatically. It displays introduction screen for a few minutes. Afterwards the touch panel enters into Android mode. 2. Shut down the Climatix touch panel and switch it on again. The upgraded firmware is available on the Climatix touch panel. -
Page 21: Configuring The Climatix Touch Panel
Configuring the Climatix touch panel Set screen brightness 6 Configuring the Climatix touch panel You can configure the following Climatix touch panel settings: ● Screen brightness ● System date and time ● Network configuration ● Serial port test ● Language To access the Settings mode: 1. -
Page 22: Configure The Network
Configuring the Climatix touch panel Configure the network 6.3 Configure the network To configure the network setting of the Climatix touch panel: 1. Press Network. 2. Choose either automatic address assignment via DHCP, or a Static IP for the Climatix touch panel. –... -
Page 23: Set The Language
Configuring the Climatix touch panel Set the language 5. In the setting mode, enter test data (for example, 1234) in the Send characters textbox and press Senddata. 6. If the monitor software receives the same data (1234, in this example), the test is successful. -
Page 24: Maintenance And Care
Maintenance and care 7 Maintenance and care The Climatix touch panel is designed for maintenance-free operation. Keep the touch screen and keyboard membrane clean. Proceed as follows: 1. Shut down the Climatix touch panel. 2. Spray the cleaning solution onto a cleaning cloth. Do not spray directly onto the Climatix touch panel. -
Page 25: Technical Specifications
Technical specifications Technical data 8 Technical specifications 8.1 Technical data Power supply Rated voltage (range) DC 24 V (±15%) Consumption Withstand voltage test AC 1000 V, 1 minute Interfaces USB port USB type A, USB type B Ethernet port Serial interface RS485 Memory Application memory... -
Page 26: Interface Description
General data Dimensions (mm) 210 × 130 × 36 Weight (kg) 0.64 Ordering data Article type (ASN) POL8T5.70/STD Material (SSN) S55626-H857-A100 Minimum order quantity Product package Touch panel Power supply and communication cables are not included in product package. Please order separately. - Page 27 Technical specifications Interface description RS485 Interface Figure RS485 Pin on controller RS485 A+ RS485 A+ (for RS485 connection) RS485 B- RS485 B- (for RS485 connection) 24 V 24 V IP interface Figure Pin on controller 24 V 24 V Note: RS485 and LAN ports can also supply power.
- Page 28 Technical specifications Interface description Communication cable Cable is not included in the package. Please order POL0C1.75/STD or POL0C1.80/STD separately. The following is an example of RS485 connection. Note: Accessories POL0C1.80/STD and POL0C1.75/STD (touch panel-controller communication cables) have an RJ45 connector. To connect the touch panel with the Climatix controller RS485 port, cut off the plug and then connect two wires as shown above.
-
Page 29: Dip Switches
Technical specifications DIP switches 8.3 DIP switches The DIP switches are inside the Climatix touch panel. If they would be changed in rare cases, you need to open the housing. Descriptions of the DIP switches are listed as below: DIP switches*) (1 -- 3) Function Normal operation mode Setting mode... - Page 30 Issued by Beijing Siemens Cerberus Electronics Ltd. Smart Infrastructure No.1, Fengzhi East Road, Xibeiwang Haidian District, 100094 BEIJING, China +86 10 64768806 www.siemens.com/buildingtechnologies © Beijing Siemens Cerberus Electronics Ltd., 2018 Technical specifications and availability subject to change without notice. A6V11521029_en--_c...