Usage Planning; Overview; Unpacking And Checking The Delivery Unit - Siemens 670 V2 Operating Instructions Manual

Usage planning

4.1

Overview

Introduction
This section describes the first steps after unpackaging, the permitted mounting positions
and the fixation. This section describes the necessary considerations for EMC.
Notice
Take note of the corresponding information in the operating instructions for the computer unit
and the operator unit.
Field of application
The SIMATIC Panel PC is an industry-standard PC platform for demanding tasks in the field
of PC-based automation. The Panel PC is designed for on-site use on the machine, installed
for example in:
• Control cabinets and consoles
• 19" racks
• Swivel arms (booms)
4.2

Unpacking and checking the delivery unit

Procedure
1. Upon delivery, check the packaging for damage incurred during transport.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Note
In the following, the term "control cabinet" also refers to rack, mounting rack,
switchboard, operator panel and console. The term "device" represents the Panel PC and
its variants.
shipping company in charge. Have the shipper confirm the transport damage
immediately.
4
4-1