Siemens SIMATIC PC 670 Equipment Manual page 3

Correct Usage
Please note the following:
Warning
!
The device may only be used for the application cases specified in the catalog and the
technical description and may only be used in combination with third-party equipment
and components recommended or approved by Siemens.
Appropriate transport, and appropriate storage, installation and assembly, as well as
careful operation and maintenance, are required to ensure that the product operates
perfectly and safely.
Trademarks
The registered trademarks of the Siemens AG can be found in the preface.
Impressum
Editor and Publisher: A&D PT1
Copyright Siemens AG 2002 Allrights reserved
The transmission and reproduction of this documentation and the exploitation
and communication of its contents are not permitted without express
authority. Offenders will be liable for compensation for damage. All rights
reserved, especially in the case of the granting of a patent or registration of a
utility model or design
Siemens AG
Bereich Automation & Drives
Geschäftsgebiet SIMATIC HMI
Postfach 4848, D-90327 Nürnberg
Siemens Aktiengesellschaft
Exclusion of Liability
We have checked the content of this publication for compliance with the
described hardware and software. However, discrepancies cannot be exclu-
ded, with the result that we cannot guarantee total compliance. The informa-
tion in this publication is, however, checked regularly, and any necessary
corrections are included in the following editions. We welcome any suggesti-
ons for improvement.
E Siemens AG 2002
Technical data subject to change.
Release 04/02