Overview Of The Components And Interfaces - Siemens SIMATIC PC 670 Equipment Manual

Release 04/02
7.2

Overview of the Components and Interfaces

Component/
Port
Chipset VIA PN133T
BIOS Update via software
CPU Pentium III / Celeron
(type FC-PGA370)
Memory DIMM modules
up to max. 256MB/DIMM
Graphics card UXGA LCD Controller on the AG Bus is
integrated Chip set (S3)
Hard disk ATA-33 mode
CD-ROM drive Master on secondary EIDE channel
CD-RW/DVD Master on secondary EIDE channel
Floppy Notebook port for 34-pin ribbon cable
LS240 Slave on secondary EIDE channel
Keyboard Port for PS2 keyboard
Mouse PS2 mouse port
Serial COM1/25 pins
COM2/9 pins.
TTY Communication with SIMATIC S5-CPUs
Panel PC 670 Computing Unit, Equipment Manual
Description
Hardware Information
Parameters
S
SDRAM
S
512K in 4 pages
S
Upgradeable
S
Multimedia support
S
On Board L2-Cache with 128 k/256 k
/512 K
S
Data capacity of 64 bits + ECC
S
Modules with ECC possible
S
3.3 V
S
SDRAM to PC100 specification
S
up to 128MBit chip size on the module
S
66/100MHz bus speed
S
2 DIMMs can be used
S
Easy to replace
S
variable from 64-512MB/DIMM
S
up to 32 Mbytes of SDRAM are part of
the main memory and can be
configured (8/16/32MB)
S
CRT:
up to1600x1200/85Hz 65536 colors
with PC133 memory modules
up to1280x1024/85Hz 65536 colors
with PC100 memory modules
S
Ultra DMA capable
S
24 speed
Multi Spin Writer Drive
S
Read: CD-ROM, CD-R 14-32 times,
CD-RW 8-20 times Speed
S
Write: CD-R 12 times,
CD-RW 10 times Speed
suppors recording:
S
Disc at once, Track at once,
Session at once, Packet writing
S
1.44 MB
S
1.44 MB standard floppy disks
S
120MB/240MB SuperDisk
S
Standard
S
Standard
S
2
TTY * and V24
S
Standard
S
Range up to 1000 m
7-3