Menu Boot-Sequence - Siemens SIMATIC PC 670 Equipment Manual

Release 04/02
Hard Disk
Timeout
5.1.5

Menu Boot-Sequence

Overview
This menu lists the boot devices in prioritized groups.
Figure 5-18 "Boot Sequence" Menu
This menu lists the boot devices in groups. The group with the highest priority is at
the top. The procedure for changing the sequence is as follows:
Use the
new position in the sequence.
Note
During booting the boot drive can be selected with the ESC key.
Panel PC 670 Computing Unit, Equipment Manual
[Disabled] The hard disk does not shut down.
[10, 15, 30, 60] Time since the last hard-disk access, the hard disk
is shut down. On the next
access the hard disk will be activated again
with a short delay.
PhoenixBIOS Setup Utility
Main Advanced Security
+ Removable Device
+ Hard Drive
ATAPI CD-ROM Drive
F1 Help Select Item
ESC Exit Select Menu
keys to select a group and the + or – keys to move the group to its
Configuring the Computing Unit in BIOS Setup
Power Boot Sequence
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or –
<Ctrl+Enter> expands
all
<+> and <–> moves
the device up or down.
+ / – Change Values
Select
Enter Sub-Menu
Version Exit
F9 Setup Defaults
F10 Save and Exit
5-25