Siemens SIMATIC PC 670 Equipment Manual page 101

Release 04/02
Submenu "Hardware Options"
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Figure 5-8 "Hardware Options" Submenu
The parameters of the interfaces present on the basic module are set here.
Entry
PCI-MPI/DP
On Board
Ethernet
Ethernet
Address
LAN Remote
Boot
Panel PC 670 Computing Unit, Equipment Manual
PhoenixBIOS Setup Utility
Main
Hardware Options
[ Enabled
PCI – MPI / DP:
[Enabled]
Onboard Ethernet:
08000624xxxx
Ethernet Address:
LAN Remote Boot: [Disabled]
Cardbus/PCMCIA Slot: [Enabled]
[Enabled]
SafeCard functions:
Legacy USB Support: [Disabled]
Fan Control: [Enabled]
CRT / LCD selection: [SIMULTAN]
LCD-Screensize: [Expand]
DSTN Contrast: [154]
PS/2 Mouse: [Enabled]
Help Select Item
F1
ESC Exit Select Menu
Enables the CP5611-compatible MPI/DP interface. The recourses are
managed by the BIOS PCI plug and play mechanism.
Enabled The ethernet port on the motherboard is enabled.
Disabled The ethernet port on the motherboard is disabled.
The individual ethernet address is displayed here.
Enabled It is possible to boot over a connected
LAN. The respective boot source is displayed as
Intel Boot-Agent in the boot sequence menu
Disabled Booting using LAN is not possible.
Configuring the Computing Unit in BIOS Setup
Item Specific Help
Enable or disable the
]
PCI - Multi Point
Interface (MPI/DP)
+ / – Change Values
Select
Enter Sub-Menu
Meaning
F9 Setup Defaults
F10 Save and Exit
5-13