The Boot Sequence Menu - Siemens SIMATIC Panel PC 870 Equipment Manual

5.6

The Boot Sequence menu

This menu lists the boot devices in prioritized groups.
Main Advanced
+ Diskette Drive
+ Removable Device
+ Hard Drive
ATAPI CD-ROM Drive

Intel Boot Agent *)
F1 Help
ESC Exit
*) only iof the function "LAN Remote Botot" has been set to "Enabled" in the Hardware Options
menu beforehand
Figure 5-16
This menu lists the boot devices in prioritized groups.
The boot sources are displayed in groups. The group with the highest priority is at
the top. The procedure for changing the sequence is as follows:
Use the ↑, ↓ keys to select a group. Use the +, – keys to move the group to its new
position in the sequence.
Note
During startup the boot drive can be selected with ESC.
Groups marked + contain more than one device. When you select a group marked
in this way, hit Enter to view the list of devices in the group. See the figure below
for an illustration:
Panel PC 870 Computing Unit Equipment Manual
Edition 12/01
Configuring the Computing Unit in the BIOS SETUP
PhoenixBIOS Setup-Utility
Security Power
Boot Sequence
Select Item
+ / – Change Values
Select Menu Enter Select Sub-Menu
The BOOT Sequence menu
Version Exit
Item Specific Help
Keys used to view or configure devices:
<Enter> expands or collapses
devices with a + or –
<+> and <–> moves the device up or
down.
<Ctrl+Enter> expands all
F9 Setup Defaults
F10 Save and Exit
5-21