Table of Contents
Advertisement
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
The example below shows how to save settings as "User Default" to restore user defaults
later:
Steps
Action
1
Power on the scanner...
2
Enter the Configuration Mode...
3
Read a Setup barcode...
For example,
4
Exit the Configuration Mode...
5
The scanner will automatically restart itself...
*
When any configuration error occurs...
OR
Scanner Feedback if Successful
The scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
The scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will be flashing red.
The scanner will respond with two beeps
(low-high tone) if reading a normal setup
barcode.
Same as for Enter the Configuration Mode.
Same as for Power on the scanner.
The scanner will respond with one long
beep (low tone).
Update
9
Hide quick links:
Advertisement
Table of Contents
