Example - CipherLab 2200 User Manual

2200 Omnidirectional Presentation Scanner

EXAMPLE

KEY TYPE = NORMAL
For example, if you want to program the character "!" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character "a" (= "1C" on the scan code table) as the
prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Scan Code" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix
code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Shift" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = CTRL
For example, if you want to program "Ctrl+A" and "Ctrl+$" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Left Ctrl" barcode.
3. Read the "Hexadecimal
4. Read the "Add Left Ctrl" barcode.
5. Read the "Hexadecimal
6. Read the "Validate" barcode to complete this setting.
28
User Guide
Value" barcode on page 30 for "2" and "1".
Value" barcode on page 30 for "1" and "C".
Value" barcode on page 30 for "3" and "1".
Value" barcode on page 30 for "4", "1" (= "A").
Value" barcode on page 30 for "2", "4" (= "$").
Enter Setup