Technical Specifications - Siemens S5-135U/155U System Manual

Interface Modules
7.4

Technical Specifications

Important for the USA and Canada
The following approvals have been obtained:
Given in the following are the technical specifications of the IMs and pin
assignments of the connecting cable and terminator.
General Specifications
Degree of protection
Insulation class
Operating temperature
Transportation and storage temperature
Relative humidity
Mechanical requirements
Supply voltage (internal)
Specifications for Specific IMs
Interface IM 300 IM 300
module (-5CA)
Max. cur- 0.6 A 0.6 A
rent con-
sumption
Max. cur- – 5 A
rent per in-
terface
Weight, 0.35 kg 0.35 kg 0.25 kg 0.3 kg
approx.
7.4.1 6ES5 721 Connecting Cable
The 6ES5 721-xxx connecting cable is intended for interconnection of the
CC/EUs. Refer to the catalog for the SIMATIC length codes.
7-20
UL Listing Mark
Underwriters Laboratories (UL) to
Standard UL 508, Report E85972 and E116536 for the IM 300-5LB11
CSA Certification Mark
Canadian Standard Association (CSA) to Standard C 22.2 No. 142,
Report LR 63533C and LR 48323 for the IM 300-5LB11
IP 20
C to VDE 0160
o
0 to 55 C
o
– 40 to 70
95 % max. at 25
see description of central controllers
5 V + 5 %
IM 300 IM 301 IM 301
(-5LB) (-5CA) (-3AB)
50 mA 0.75 A 0.75 A
2 A 5 A –
0.3 kg
C
o
C, no condensation
IM 304 IM 310 IM 312 IM 314
1.2 A 0.7 A 0.2 A
– – –
0.35 kg 0.3 kg 0.35 kg 0.3 kg
C79000-G8576-C199-06
1.0 A
–
System Manual