Siemens S5-135U/155U System Manual page 351

8.4.5 6ES5 434-4UA12 Digital Input Module
Rated input voltage (LH+)
Rated input voltage (L+)
Number of inputs
Isolation
Input voltage TTL: for logic 0
CMOS:
Rated input current TTL:
CMOS:
NAMUR:
Internal resistance
Line resistance
Input frequency
Delay time
for positive-going edge
for negative-going edge
Coincidence factor (total load capability)
Permissible line length TTL/CMOS
NAMUR
Power supply
Digital section from system bus
Supply voltage L+/L–
Current consumption at L+/L–
Current consumption at LH+/LH–
Current output from LH+/LH–
Power dissipation (rated operation)
Enable input (F+/F–)
Rated input voltage
Input voltage for logic 0
for logic 1
Rated input current
Permissible line length
Voltage test to VDE 0160
Mechanical specifications
Dimensions (W x H x D)
Weight
1)
NAMUR = Sensor with current output to DIN 19234, Standards Committee for Measurement and Control.
However, the module is not intrinsically safe.
2)
The current consumption from L+/L- increases accordingly.
System Manual
C79000-G8576-C199-06
DC 5 to 15 V
DC 12 to 24 V (NAMUR)
32
Yes, 1 group of 32 inputs
0 to 0.8 V
for logic 1 2.4 to 5.0 V
for logic 0 0 V to 0.3 x LH+
for logic 1 0.7 V x LH+ to 1 x LH+
for logic 0 –1 mA
for logic 1 0.1 mA or open input
for logic 0 –1 to –3 mA (5 to 15 V)
for logic 1 0.1 to 0.3 mA (5 to 15 V)
for logic 0 1.2 mA
for logic 1 2.1 mA
1 kilohm typical
50 ohms max.
100 Hz max.
3 ms typical (1.4 to 5 ms)
3 ms typical (1.4 to 5 ms)
100 %
200 m max. unshielded
600 m max. unshielded
5 V, 80 mA typical
24 V (20 to 30 V)
100 mA each
150 mA each at 15 V input voltage
120 mA each at 8.5 V sensor supply (NAMUR)
5.5 W
5/ 15/ 24 V DC
–15 to 2 V
4 to 33 V
5 mA
100 m max.
Between group and ground point: 1250 V AC
20 mm x 255 mm x 195 mm
Approx. 0.45 kg
Digital Input/Output Modules
1)
2)
8-39