Central Controllers and Expansion Units Power Supply Units
4.5
Fan Submodules
4.5.1
Technical Description
The fan submodule variants 6ES5 988-3LA11 (230 V AC) and
6ES5 988-3NA11 (24 V DC) are described in the following section.
A fan submodule has the following function:
Connections and
The following terminals and LEDs are fitted on the front plate (the front
LEDs
plate of the -3LA11 is shown as an example):
SIEMENS
AC line
AC 230V
CAUTION!
Disconnect
before
removing
power supply!
Voltage selector
inside the unit!
L1 N
ID
Label
Element
1
2
3
230V AC
Screw
terminals
L1, N
24V DC
Screw
terminals + –
4
Monitor Output Relay output
5
Fan Fault
Red LED
4-70
Heat dissipation
The fan submodule dissipates any excess heat created in the central
controller or expansion unit.
Monitor Output
Relay max.
250V AC/3A
Fan
Fault
1
2
3
Use copper wire 60/75 C only!
Tightening torque: terminals 0,8Nm/ 1,8 Nm
Protective conductor terminal for fan submodule and housing.
ZStrain reliefs for connecting cables, with metal contact surface for cable
shields.
AC connection
(details for -3LA11)
24 V DC supply
(details for -3NA11)
Standstill of one or both fans is signaled via LED and relay contact.
The LED lights up to indicate a fan fault.
Purpose
System Manual
C79000-G8576-C199-06