Notes On The Ce Symbol - Siemens S5-135U/155U System Manual

Notes on Using this Manual and on the CE Symbol

Notes on the CE Symbol

EC Directive on The following applies to the SIMATIC products described in this manual:
EMC 89/336/EEC
Products which carry the CE symbol fulfil the requirements for the EC
Directive 89/336/EEC on "electromagnetic compatibility."
The EC declarations of conformity and the documentation relating to this are
available to the authorities concerned, according to the above EC Directive,
Article 10 (2), from:
Products which do not carry the CE symbol meet the requirements and
standards given in this manual under the respective "Technical
Specifications" sections.
Fields of
For SIMATIC S5, the following fields of application apply according to this
Application
CE symbol:
Observing the The installation guidelines and safety-related guidelines given in this manual
Installation
must be observed during startup and when operating SIMATIC S5 devices.
Guidelines
Moreover, the following rules must be observed when using certain modules.
Installing the Programmable controllers of the type SIMATIC S5-135U/S5-155U must be
Devices
installed in metal cabinets according to these installation guidelines.
Working on
To protect the modules from static discharge, the user must discharge his
Cabinets
body's electrostatic charge before opening a cabinet.
1-4
Siemens Aktiengesellschaft
Automation Group
A&D AS E48
Postfach 1963
D-92209 Amberg
Field of Application
Emitted Interference
Industry EN 50081-2: 1993
Requirement for
Noise Immunity
EN 50082-2: 1995
System Manual
C79000-G8576-C199-06