CPUs, Memory Cards, Memory Submodules, Interface Submodules
Jumper Settings
When the SINEC L1 submodule is delivered, the jumpers are set as shown in
on the SINEC L1
the following figure. As a rule, therefore, you can use the SINEC L1
Submodule
submodule immediately.
Figure 5-29
BT 777 Bus
The connection to the SINEC L1 bus system is provided by the BT 777 bus
Terminal
terminal. A detailed description of the bus terminal can be found in the
manual entitled "SINEC L1 Bus System," 6ES5 998-7LA11).
The order number can be found in the ordering information.
5-120
Front Connector
15-Pin Sub. D-Type
X8
X7
X10
X9
X6
3
2
1
Backplane Connector
SINEC L1 Submodule: Jumper Settings when Delivered
System Manual
C79000-G8576-C199-06