Table of Contents
Advertisement
CMGA-E1-DN
4.2.4
Configuration of the DeviceNet scanner
The following settings must be made by selecting the scanner (here: 1756-DNB).
The I/O parameters must be selected in the Scanlist menu.
Fig. 5
Configuration of the DeviceNet scanner scanlist
In the Input menu the input information (16 byte cyclic) must be "mapped" in the address range of the
scanner.
Fig. 6
Configuration of the DeviceNet scanner address range
When all settings have been made, the network diagram can be saved.
Festo – GDCP-CMGA-E1-DN-EN – 1201NH
9
Advertisement
Table of Contents
