Upper Case/ Lower Case Mode; Digit Mode - UTStarcom UTS 702 U User Manual

3-2 Address book
lower case letters, simplified Chinese, digits and symbols. Each input mode
provides a different set of characters that are accessed using the keypad
and/or the navigation key and soft keys.
Pressing
input mode when a name or text message is being entered. The
(Star / IP) key switches the input mode between the upper case letters,
lower case letters, simplified Chinese and digits where as the
Lock) key switches the input mode to symbol mode only.
The selected input mode is shown with an icon that appears in the left corner
of the scratch pad box located at the bottom of the LCD screen as shown in
the table below.

3.1.2 Upper Case/ Lower Case Mode

To select characters for a name or text message that you wish to enter press
the key on the keypad until the character appears in the scratch pad box at
the bottom of the LCD screen. When the desired character is displayed in
the scratch pad box, press the
the right in the name/text display field at the top of the LCD screen.
Pressing a different key on the keypad to enter the next character has the
same result. If you do not take any action the character displayed in the
scratch pad box is automatically moved to the name/text display field after
approximately one second.
Characters can be deleted from the scratch pad box or name/text display
field using the right soft key

3.1.3 Digit Mode

To enter digits press the key on the keypad with the corresponding number.
When the key is pressed the digit appears in the name/text field. Digits can
be deleted from the name/text display field using the right soft key
(Clear).
(Star / IP) or
Mode Icon
Upper case letter
Lower case letter
Simplified Chinese
Digits
Symbols
to move the character and the cursor to
702 U User Manual
(# / Lock) key changes the character
(Clear).
(# /