Answered Call Log - UTStarcom UTS 702 U User Manual

2-10 Basic Operations

2.4.3 Answered Call Log

The last forty phone numbers (maximum of 24 digits each) received by the
phone are stored in memory. The answered call log allows you to view the
phone number, call the phone number, view the time of the received call,
call duration, delete the phone number or save it to the Address book.
If the caller's phone number has been entered into the Address book, their
name and group is shown when the call is displayed.
Note:
6. Use the navigation key
soft key
7. Enter the person's name (up to 12 letters) or leave blank if desired.
Press the left soft key
the phone number is use for the name.
If the LCD display flashes "Exists" after you enter a name it
means there is already an entry with the exact same name and
phone number stored in the phone's memory.
If there are no empty memory locations, the LCD displays
flashes "Full". Select a name and phone number to delete before
adding new name and phone number.
8. Choose a Group by pressing
key (Ok).
9. The phone enters the information and returns to the Options menu.
Press the right soft key
outgoing calls.
10. Press (End) to exit the menu and return to stand-by mode.
You must subscribe to a Caller ID service for the calling party information
to be entered into the Answered Call log.
If calling party has blocked the calling information from being sent, the
caller's phone number will not entered into the Answer Call log.
If the same caller calls more than one time, the caller's phone number is
entered only once into the Answered Call log.
or to reach Store and press the left
(Ok) to select.
(Ok) to enter. If no name is entered,
or
(Back) to return to the list of
702 U User Manual
and then press the left soft