Sms; How To Enter Letters, Characters And Symbols Using The Keypad - UTStarcom UTS 702 U User Manual

702 U User Manual
16. Use the navigation key
17. Use the navigation key
18. Use the navigation key
19. Use the navigation key
20. Use the navigation key
21. To exit and return to standby mode press

4.2 SMS

The Short Message Service (SMS) is a network service, which enables you
to send and receive text messages up to 116 English or 58 Chinese
characters in length. Messages can be edited, stored, deleted and forward to
others using your phone.
Before you can send any messages, you will need to contact your service
provider to subscribe to the SMS. Your service provider can tell you if the
service is available in your area and answer any questions.
Prior to sending any text messages make sure the receiving phone is SMS
compatible.

4.2.1 How to Enter Letters, Characters and Symbols Using the Keypad

As shown in the table below, more than one character (letters and a number)
is assigned to each key of the keypad. The available character set depends
on the input character mode and whether a phone number, name or text
message is being entered into the handset. Only the characters (0-9, *, #
and
(A, a, B, b, C, etc), numbers and symbols can be used for a name or text
message.
2, etc.) and press the left soft key
changing the ringing tone types, the phone automatically rings.
left soft key (Ok) to select.
OFF) and press the left soft key
left soft key (Ok) to select.
and press the left soft key
) are available for a phone number whereas the letters
pause for IP only
Other Essential Functions 4-5
or to select an alarm tone (Ring 1, Ring
(Ok) to select. When
or to reach Keypad Tone and press the
or to turn the keypad tone (ON or
(Ok) to select.
or to reach Alert Tone and press the
or to turn the alert tone (ON or OFF)
(Ok) to select.
(End).