Battery Installation; Battery Insertion - UTStarcom UTS 702 U User Manual

1-6 Before Using Your Phone
7.
8. GR (Group Mode):
9. LCD Screen:
10.
11. Missed Call:
12. Low Power Warning:

1.5 Battery Installation

1.5.1 Battery Insertion

1. Remove the cover by sliding while pressing towards the base of the
2. Connect the cord of the battery by firmly inserting
Note: The battery cord is color-coded, the red line is
3. Insert the battery into the compartment of the phone. Place the cord
Indicates the handset ringer has been disabled and/or the vibrator has
been activated.
Battery:
Indicates the battery charge level status in 4 steps:
- Fully charged
- Fair
- Low, not much power left
- Requires charging
Indicates the handset is logging into a group.
Displays the phone numbers, short messages and text that have been
entered.
Keypad Lock:
Indicates the keypad lock is activated.
Indicates a call was received but was not answered.
the battery is running out of power and only a few minutes
Indicates
of talk time remains, a warning tone is heard and "Please Charge" is
flashed on the display. When there is no more talk time the phone
switches itself off.
phone as illustrated.
the connector until a click is heard. Check the
orientation of the connector before inserting.
positive (anode), the black line is negative (cathode)
and the yellow line is a sensor output
between the phone body and the battery.
702-U User Manual