Dialing To Internet - UTStarcom UTS 702 U User Manual

5-2 Maintenance & Troubleshooting
5.2

Dialing to Internet

the Dialing access.
During the dialing process, the handset screen displays "Dialing..." signal
and the dialing number. After successful connection, the screen displays
"Data Transmitting..." and the speed and approximated time for
downloading. Press the left soft
disconnect through computer. The screen displays "End Transmitting."
Note:
If
directly to standby screen after the transmission is over.
The screen display "Transmission Interrupted" if the connection is interrupted
abnormally due to USB/internet disconnection. Press any keys or wait for two
seconds to return to stand by screen.
Disconnection may occur if the signal is weak. It's suggested to use wireless
internet when the handset signal is at level 1 or above.
Avoid using wireless Internet while traveling in a high speed in order to prevent
disconnection.
The time for wireless access is also limited by the power of the battery. To
access Internet for a long period of time, please fully charge the battery to
insure the phone has enough power.
Note: Please refer to USB modem user manual for detailed steps of
key is pressed during data transmission, the handset screen returns
702 U User Manual
key to disconnect directly or