NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
RealPOS POS Stand This kit provides a table-top stand for the NCR RealPOS XR7 POS or NCR RealPOS 5968/5985 Display. Installation Procedures 1. Lay the terminal face down on a flat surface. Caution: Always use a soft material (cloth, foam) to protect the display screen...
Page 4
RealPOS XR7 POS Stand 2. Insert the Mounting Plate Studs (2) into the openings in the Rear Cover at a slight angle as shown. 3. Rotate the stand flush into the Rear Cover and secure it with the captive screws (2).
RealPOS XR7 POS Stand Cable Routing Cables are routed out the opening in the Cable Cover and down through the POS Stand. 1. Remove the Upper Stand Cover by pivoting it away from the stand. The cover has a simple snap fit connection at the top.
Page 6
RealPOS XR7 POS Stand 3. Route the cables down through the opening in the POS Stand Base.