Measurement Accessories; Cable And Adapter Sets - Keysight Streamline Series Configuration Manual

Measurement Accessories

A complete list of RF and microwave test accessories is available on our Web site:
www.keysight.com/find/mta
Accessories are available in these connector types: 50 Ω Type-N, 3.5 mm, 7 mm, 2.4 mm, 2.92 mm, 1.85
mm, 1.0 mm, and waveguide. Test port cables and a calibration kit should be added for a complete
measurement system. A verification kit is used to verify corrected system performance.

Cable and adapter sets

Keysight offers cables in the following types:
Single cables in semi-rigid and flexible
•
Cable sets in semi-rigid and flexible
•
There are also adapter sets available that protect the test port and convert the port to the desired
connector interface. These kits contain:
One male adapter
•
One female adapter
•
To attain the best mechanical rigidity for device connection, use a single cable and the appropriate
special adapter set. To attain the greatest flexibility for device connection, use a cable set.
Find us at www.keysight.com
12 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Page 12