Hardware Installation Guide for the Polycom SoundStructure
an interface may consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
The REN of this equipment is either marked on the unit or included in the new style USA (FCC registration
number). In the case that the REN is included in the FCC number the user should use the flowing key to
determine the value:
The FCC number is formatted as US: AAAEQ##TXXX.
## is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0 = 10, REN of 0.3 = 03). In
the case of a "Z" ringer, ZZ shall appear. In the case of approved equipment without a network interface and
equipment not connecting to circuits with analog ringing supplied then "NA" shall appear.
EEA (European Economic Area) Including Switzerland
CE Mark
This SoundStructure has been marked with the CE mark. This mark indicates compliance with with all
applicable CE marking directives. A full copy of the EU declaration of conformity can be obtained from
Polycom (Netherlands) BV, Orlyplein 10, 23rd Floor 1043DP, Amsterdam, Netherlands.
Australia
Mains powered POT's Voice Telephony without Emergency 000 dialing
Warning:
This equipment will be inoperable when mains power fails.
Reference: AS/ACIF S002:2001 (incorporating Amdt 1) DECEMBER 2001
Clause 5.1.8.4 Provision of power-fail advice
Japan (VCCI)
Polycom, Inc.
46
Need help?
Do you have a question about the SoundStructure C16 and is the answer not in the manual?
Questions and answers