Connecting Microphones To Soundstructure - Polycom SoundStructure C16 Hardware Installation Manual

Hardware Installation Guide for the Polycom SoundStructure
Do not use Conference Link2 to connect multiple SoundStructure devices together.
The OBAM link must be used for connecting multiple SoundStructure devices.
Warning

Connecting Microphones to SoundStructure

To connect optional HDX or RealPresence Group Series microphones to a SoundStructure device, connect
the Polycom Microphone Cable Adapter to the right CLink2 port (when viewed from the rear) of the
SoundStructure device and connect the Polycom HDX or RealPresence Group Series microphone cable to
the cable adapter, as shown in the following figure. Chapter 6 of SoundStructure Design Guide has
additional information on how to use the HDX or RealPresence Group Series microphones with
SoundStructure.
When connecting microphones to Conference Link2 port, connect any HDX or
RealPresence Group Series microphones to the right Conference Link2 port (when
facing the rear panel). Connect the HDX or RealPresence Group Series system to
the left Conference Link2 port (when facing the rear panel).
Warning
When using the Polycom Microphone Cable adapter with RealPresence Group Series or HDX
Codecs, make sure the cable is inserted the correct way as the plug and the connector are polarized.
If the plug is inserted incorrectly, damage may occur to the SoundStructure and RealPresence Group
Series or HDX devices.
Polycom, Inc. 17