Product Manufacturing Information; South Africa - Polycom SoundStructure C16 Hardware Installation Manual

Hardware Installation Guide for the Polycom SoundStructure
Access Polycom Technical Support
If you are not able to make test calls successfully and you have verified that the equipment is installed and
set up correctly, contact your Polycom distributor or Polycom Technical Support. To contact Polycom
Technical Support, go to

Product Manufacturing Information

This section includes manufacturing information for Polycom SoundStructure C8, SoundStructure C12,
SoundStructure C16, and SoundStructure SR12.
Country of Manufacture
The country of manufacture is Thailand.
Sales Terms and Conditions
Sales terms and conditions are stated in the agreements with authorized distributors.
Month and Year of Production
The fields YYYYMMDDLL include the month, year, and location of production, and is located on the bottom
of the SoundStructure device with the Serial number. The following table provides a description of each field
for production.
Month and Year Fields
Field
YYYY
MM
DD
LL

South Africa

Important Notice to South African customers:
Polycom recommends the use of an external surge suppressor when using the SoundStructure TEL1 or
TEL2 plug-in cards.
A standard DM surge protector (Telkom license number MIS/19) is available from:
Design Modifications CC
Att: Petrus Geyser
P.O. Box 15245
Sinoville 0129
South Africa
Tel: (082) 452 0269
Polycom, Inc.
Polycom Support web site.
Field Description
Production year. This is the year during which the unit was manufactured.
Production month. There are twelve months in a year, therefore these two digits will
line in the range between 01-12.
Production day. There are up to thirty one days in a month, therefore these two digits
will lie in the range between 01-31.
Location code. This is used to determine the factory where the unit was produced.
49