Holding Registers; Read Input Register; A.3 Holding Registers - Kipp & Zonen SMP series Instruction Manual

.

A.3 Holding registers

Device Control
PDU address Parameter
34 IO_DEF_SCALE_FACTOR
35 to 40 Factory use only
A.4 Read input register
Many of the registers and controls are for remote diagnostics. In this chapter only the most interesting registers and controls
are described.
Register 0 IO_DEVICE_TYPE
The device type defines which device is connected. This register can be used to check the type of the connected device.
IO_datamodel_version 102 supports the following type of sensors.
Real-time Processed Data
Parameter name Register R/W
IO_DEVICE_TYPE R0
Parameter Value
SMP3 601
(volt version)
SMP3 602
(current loop version)
SMP6 619
(volt version)
SMP6 620
(current version)
SMP10 617
(volt version)
SMP10 618
(current version)
SMP11 603
(volt version)
SMP11 604
(current loop version)
SMP21 605
(volt version)
SMP21 606
(current loop version)
SMP22 607
(volt version)
SMP22 608
(current loop version)
SGR3 609
(volt version)
SGR3 610
(current loop version)
SGR4 611
(volt version)
SGR4 612
(current loop version)
SHP1 613
(volt version)
SHP1 614
(current loop version)
SUV5 615
(volt version)
SUV5 616
(current loop version)
R/W Type Mode
R/W S16 All
Initial Val
R 65535
# of sensors 1/Sensitivity
1 5-20 V/(W/m²)
1 5-20 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
2* 5-15 V/(W/m²)
2* 5-15 V/(W/m²)
2* 5-15 V/(W/m²)
2* 5-15 V/(W/m²)
1 7-14 V/(W/m²)
1 7-14 V/(W/m²)
1 300 - 500 V/(W/m²)
1 300 - 500 V/(W/m²)
Description
Default scale factor
Mode Description
All Selected device type of the sensor
Type
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyranometer
Pyrgeometer
Pyrgeometer
Pyrgeometer
Pyrgeometer
Pyrheliometer
Pyrheliometer
UV Radiometer
UV Radiometer
43