Additional wiring options
Connecting your accessory to tubular track
Y
ou can also connect your accessory to tubular track using the included 8" 3-pin female
pigtail. Plug in the 3-pin male connector of the accessory into the 3-pin female pigtail.
Then attach the red wire to the inside rail position of the universal lock-on (6-24213) and the
black wire to the outside rail position. See figure 4.
Note
The white wire is not used when connecting your accessory to tubular track.
Swing Accessory
Tubular
track
Figure 4. Connecting your accessory to tubular track.
Black wire
7
3-pin male
connector
3-pin female
connector
8" 3-pin female pigtail
Red wire
Universal lock-on