Plug-N-Play Basics; Connecting Your Accessory To A Plug-N-Play Lock-On - Lionel Playground Swings Owner's Manual

Plug-n-Play basics

Wiring your accessory
Y
our Plug-n-Play Playground Swings Vignette connects to either a Plug-n-Play lock-on
(6-81313) or a Plug-n-Play power block lock-on (6-81314) with a 3-pin male connector
that is attached to its base. Simply plug this connector into the lock-on and apply track
power. Two children will swing when track power is applied. See figure 1 for wiring.
3-pin male
connector
Lock-on
Figure 1. Accessory wiring
3-pin male
connector
OR
4
Swing Accessory
3-pin male
connector
Power Block
Lock-on
Auxiliary Power Supply
(optional)